Hammond offers one of the broadest ranges of dry-type distribution transformers available in North America. This includes single and three phase general purpose transformers, non-linear (K-factor) transformers, energy efficient (TP1) transformers, low temperature rise transformers, low voltage lighting transformers, encapsulated transformers and three phase drive isolation and autotransformers. Available in standard ratings from 9kVA to 750kVA in many voltages, each of these products is also available in custom ratings and voltages.
Hammond's line of single phase and three phase general purpose distribution transformers are rated for 600 volts and below. They are generally used for supplying appliance, lighting, motorized machine and power loads from electrical distribution systems. They are either ventilated or totally enclosed, and are available with either aluminum or copper windings in standard ratings from 50 VA up to 750 kVA.
Shielded distribution transformers are also available, which provide a copper electrostatic shield between the primary and secondary windings. The shield is grounded and thus shunts most noise and transients to the ground path rather than passing them through to the secondary. Applications for shielded transformers are similar to those above, and are ideal for commercial or electrical installations where electronic circuitry operating at low voltage DC is present and is very sensitive to 'noise'.
The use of electronic equipment has continued to grow in both offices and industrial plants. Either switching power supplies or rectifier circuits power these electronic wwwices. Examples of these wwwices include computers, fax machines, copiers, printers, cash registers, UPS's and solid-state ballasts. They all contribute to the distortion of the current waveform and the generation of Harmonics. General purpose transformers, most frequently used for applications such as commercial or institutional buildings, will, by definition, supply widely varied single phase loads as described. K Factor transformers are general purpose transformers but are designed to tolerate the harmonic distortion associated with these loads.
Hammond is pleased to introduce a line of energy efficient, dry type, general purpose distribution transformers to meet NEMA TP-1 specifications. In the past several years, there has been an accelerated rate of change to introduce energy efficiency standards for transformers in North America. Many products have preceded the initiatives for transformers in an overall effort to optimize manufactured goods for environmental concerns. Governments are encouraging users to consider energy efficient products like dry type transformers, in an effort to help reduce carbon dioxide emissions. In addition to the benefits to the environment, energy efficient transformers also can realize substantial savings in operating costs thereby having a direct impact on the initial investment evaluated over a period of time.
With today's technological advances in solid-state power control devices, the use of AC and DC variable speed drives has proliferated in many industrial markets. General purpose distribution transformers are not adequate for this type of application.
Hammond's Drive Isolation transformers are designed to meet the rugged demands of both AC and DC variable speed drives and also to provide the required voltage change. The separate primary and secondary windings provide electrical isolation between the incoming line and the SCR load. The windings are designed to withstand overcurrent of 150% of the rated load for 60 seconds or 200% of the rated load for 30 seconds. A duty cycle of one start for every two hours is permitted.
Drive Isolation Transformers are sized to match standard motor horsepower and voltage ratings. Standard sizes range from 5 to 600 HP in six standard voltages in both aluminum and copper. Nonstandard sizes and voltages are available upon request.
Hammond three phase autotransformers are available for applications where small voltage corrections are necessary in a distribution system. They are frequently used as an economical alternative to three phase general purpose distribution transformers to adjust the supply voltage to match specific load requirements when load isolation from the supply line is not required. Autotransformers can be used as either a step-up or step-down transformer. Available with either aluminum or copper windings in ratings from 3kVA to 500kVA.
Hammond custom distribution transformers are designed and constructed to meet or exceed the requirements of our standard distribution transformer general applications. These transformers are provided either ventilated or totally enclosed. To meet special applications and requirements, custom/specialty designs are available to meet your specific application needs.
|
 |
 |
 |
|